Catalog download About us Contact/enquiry

Branding iron - spare parts and accessories

Electric branding tool - Branding iron » Branding iron - spare parts and accessories

Heater - Voltage regulator - Branding heads for branding iron

The following spare parts and accessories are available from stock:

Voltage regulator

For better temperature fine tuning, an additional voltage regulator can be used to improve the quality of the marking. With our voltage regulator, you cannot adjust certain temperatures but only a range of power.

Extra branding heads

To every branding iron or to every size there are of course extra branding heads available. Thus several layouts with the same hand burner stamp can be marked. Also by damage or loss of the cliché or branding head, a new brander can be provided with low expenditure.

Extra Heater

For every branding iron and size, there is a suitable and corresponding heater available.

All irons of the T series have a divided heater which is connected in series. The heater of our branding irons Type "S" is constructed as a single plate. Hand burner stamps of the series "HLP" have 2 heating cartridges as heating element.

With all types the wattage is embossed in the heater. This simplifies the re-order of the correct heating element. By old devices we ask you to add a photo of the heater of the order or inquiry.

Hand press

For the manufacturing near series of identical parts our branding irons can be also clamped in a hand lever press. Thus you can provide, for example with a side lay, large numbers of pieces with identical and place-precise marks.

Interchangeable types

Interchangeable types can be produced in different dimensions between 6 mm and 30 mm, in custom manufacturing also larger character heights. Also a customized manufacturing of block types, where several letters or figures are combined on one single block, is possible. With these kinds of types, logo engravings or symbols are also possible.