Punch set PRYOR Goliath
Marking products - Marking technologies » Hand steel stamp - Punch » Punch set PRYOR Goliath
Add article to my enquiry list
Punch set heavy duty - Punch set Goliath - Punch set A-Z heavy duty - Punch set 0-9 heavy duty
Our punch series “Goliath“ is a marking tool for heavy duty applications. These steel stamps are produced on larger blanks than the standard ones giving the opportunity to mark with greater strength or when heavy use is required. The stamps of the series “Goliath“ are made extra strong and can be also used for metals with a hardness up to 48 Rockwell 'C'.
Our punches are manufactured of f high quality Chromium tool steel. All stamps are hardened precisely, giving a hardness of 58-62 R.C. at the character end and 32-40 R.C. at the striking end. Please note, that the hardness of the component should not exceed 40 R.C.
 |
 |
 |
| Choose | Strike | Finished |
All sets are delivered in a strong plastic box with separate compartments for each punch to allow rapid selection. The production of these stamps is certificated after ISO 9001:2000. For special security requirements there is a special security holder available.
Punches of the series “Goliath“ are available as single stamps as well as in sets of A-Z and 0-9 in different sizes. All standard stamps are nickel-plated and protected therefore against rust.
Please, note that the size of the stamps must be measured on top at the sharp faced characters end.
Marking stamps of the series “Goliath“ can be supplied as follows:
|
Punches – Sets A-Z “Goliath”
|
|
|
|
|
|
Size
|
Order number
|
|
Punch set 3.0 of mm
|
PY 01017033 G
|
|
Punch set 5.0 of mm
|
PY 01019055 G
|
|
Punch set 6.0 of mm
|
PY 01021059 G
|
|
Punch set 8.0 of mm
|
PY 01027071 G
|
|
Punch set 10.0 of mm
|
PY 01028074 G
|
|
Punch set 12.5 of mm
|
PY 01029093 G
|
|
|
|
|
Punches – Sets 0-9 “Goliath”
|
|
|
|
|
|
Size
|
Order number
|
|
Punch set 3.0 of mm
|
PY 01006019 G
|
|
Punch set 5.0 of mm
|
PY 01008049 G
|
|
Punch set 6.0 of mm
|
PY 01010042 G
|
|
Punch set 8.0 of mm
|
PY 01023062 G
|
|
Punch set 10.0 of mm
|
PY 01024065 G
|
|
Punch set 12.5 of mm
|
PY 01026087 G
|
Size of the blank:
 |
For safety reasons we recommend to use security gloves or an ocular protection when using our stamps!
For further information or inquiries on this product range, please contact our sales team!
Price: Please send us your inquiry using our contact form or put this article on our watch list for later inquiries.
