Pneumatic percussion unit MB19V
Marking products - Marking technologies » Percussion presses » Pneumatic percussion unit MB19V
Add article to my enquiry list
Pneumatically powered percussion presses are suitable for fitting into automated production lines and machines. The integrator press MB19V is our smallest marking unit in this range. With a marking load of 600 kg, this press is designed for simple marking tasks within the industrial production. Due to its construction, our press can be mounted in any position within the assembly line.
Marking is achieved by compressing and releasing a spring load ram using compressed air. At the end of the lever travel the spring is automatically released and the marking operation performed. The spring compression – and therefore the marking load – can be easily and quickly adjusted from 0 to maximum load. Once the spring compression is adjusted, you will reach a consistent depth of marks. Due to the pre-clamping action of the press, material deformation can be prevented easily. The pneumatic powered version of this marking press can easily perform marking tasks in large industrial scales.
Our integrator press MB19V is simple to operate and needs only very little maintenance. The output is as fast as manual loading will allow. For your marking requirements, an enormous range of accessories (steel types, machine holders, numbering heads) makes this press even more flexible.
Integrator Press mod. MB19V – Technical data
Marking load: 600 kg (6 kN)
Net weight: 2.0 kg
Shank - diameter: 8 mm
Shank - length 32 mm
Overall stroke: 32 mm
Pre-travel: 8 mm
Useable stroke: 0 – 24 mm
Air pressure (max.) 10 bar
Air consumption per stroke: 0.22 dm ³ (4 bar)
Price: Please send us your inquiry using our contact form or put this article on our watch list for later inquiries.
