Punch set PRYOR Low Stress
Marking products - Marking technologies » Hand steel stamp - Punch » Punch set PRYOR Low Stress
Add article to my enquiry list
Punch set PRYOR lowstress - Punch set PRYOR ministress
Marking stamps “low stress” or also called “ministress punches“ are specially engineered so that lower stress levels are introduced into the component being marked. These punches are used especially for the oil, gas and aircraft industry but also for power plants and similar applications. Instead of the sharp faced characters, these punches are manufactured with a radius engraving to reduce the stress levels. Please see the difference on the following illustration.
Our punches are manufactured of high quality Chromium tool steel. All stamps are hardened precisely, giving a hardness of 58-62 R.C. at the character end and 32-40 R.C. at the striking end. Please note, that the hardness of the component should not exceed 40 R.C.
Low stress - impressions:
 |
 |
All sets are delivered in a strong plastic box with separate compartments for each stamp to allow rapid selection. The production of the punches is certificated after ISO 9001:2000. For special security requirements there is a special security holder available.
Marking stamps of the series "low stress“ are available as a single punch as well as in sets of A-Z and 0-9 in different sizes. All standard stamps are nickel-plated and protected therefore against rust.
Please, note that the size of the stamps must be measured on top at the sharp faced characters end.
Our punch sets “low stress” are available as follows:
|
Punches – Sets A-Z “low stress”
|
|
|
|
|
|
Size:
|
Order number
|
|
Punch set 3.0 of mm
|
PY 01017033 L
|
|
Punch set 5.0 of mm
|
PY 01019055 L
|
|
Punch set 6.0 of mm
|
PY 01021059 L
|
|
|
|
|
Punches – Sets 0-9 “low stress”
|
|
|
|
|
|
Size:
|
Order number
|
|
Punch set 3.0 of mm
|
PY 01006019 L
|
|
Punch set 5.0 of mm
|
PY 01008049 L
|
|
Punch set 6.0 of mm
|
PY 01010042 L
|
Size of the blanks:
 |
For further information or inquiries on this product range, please contact our sales team!
Price: Please send us your inquiry using our contact form or put this article on our watch list for later inquiries
