Deutschland Österreich English Great Britain

Punch set PRYOR Goliath


Price and information requestRequest information and prices:

 Request information and price 

Punch set heavy duty – Punch set Goliath – Punch set A-Z heavy duty – Punch set 0-9 heavy duty

 

Our punch series “Goliath“ is a marking tool for heavy duty applications. These steel stamps are produced on larger blanks than the standard ones giving the opportunity to mark with greater strength or when heavy use is required. The stamps of the series “Goliath“ are made extra strong and can be also used for metals with a hardness up to 48 Rockwell ‘C’.

 Our punches are manufactured of f high quality Chromium tool steel. All stamps are hardened precisely, giving a hardness of 58-62 R.C. at the character end and 32-40 R.C. at the striking end. Please note, that the hardness of the component should not exceed 40 R.C.
 
Schlagstempelsatz 0-9 Schlagstempel - Hammer Schlagstempel - Ergebnis
Choose Strike Finished
 
 All sets are delivered in a strong plastic box with separate compartments for each punch to allow rapid selection. The production of these stamps is certificated after ISO 9001:2000. For special security requirements there is a special security holder available.
 
Punches of the series “Goliath“ are available as single stamps as well as in sets of A-Z and 0-9 in different sizes. All standard stamps are nickel-plated and protected therefore against rust.
 
Please, note that the size of the stamps must be measured on top at the sharp faced characters end.
 
Marking stamps of the series “Goliath“ can be supplied as follows:
Punches – Sets A-Z “Goliath”  
   
Size Order number
Punch set 3.0 of mm PY PG27030
Punch set 5.0 of mm PY PG27050
Punch set 6.0 of mm PY PG27060
Punch set 8.0 of mm PY PG27080
Punch set 10.0 of mm PY PG27100
Punch set 12.5 of mm PY PG27125
   
Punches – Sets 0-9 “Goliath”  
   
Size Order number
Punch set 3.0 of mm PY PG10030
Punch set 5.0 of mm PY PG10050
Punch set 6.0 of mm PY PG10060
Punch set 8.0 of mm PY PG10080
Punch set 10.0 of mm PY PG10100
Punch set 12.5 of mm PY PG10125
 
Size of the blank:
Abmessung der Schlagstmepel-Rohlinge
 
For safety reasons we recommend to use security gloves or use our security holder "Punch Grip" when using our punches.  
 
For further information or inquiries on this product range, please contact our sales team!
 
Price: Please send us your inquiry using our contact form or put this article on our watch list for later inquiries.
 
 
Download Catalogue "Hand stamp – Punch"
 

Punch set A-Z Punch set 0-9 Punch set 0-9 Punch set A-Z Punch - impressions Punch set A-Z Punch set - mark it! Punch - Result Punch - impressions Single punch - result Punch - blank Schlagstempel18 Sharp faced character Schlagstempel22-450 Punch set 0-9 Single punch

Copyright © Margreiter-Technik Hans Hilscher GmbH